Lenze Controller-based Automation Manual do Utilizador descarregar pdf (Página 37)

Lenze · Controller-based Automation - Visualisation · System Manual · DMS 1.5 EN · 04/2014 · TD17 37

4 System description

4.3 Network topologies

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

4.3.4 CANopen®

Visualisation applications with CANopen are available for the following Lenze devices:

•HMI series EL 100

• Industrial PCs: EL 1800-9800, CS 5800-9800 and CPC 2800

The Industrial PCs use an OPC server for communication.

• Cabinet Controller 3231 C/3241 C (with an external monitor panel/display)

• Panel Controller p300/p500

Under Windows® CE, a direct driver is provided for communication.

 Note!

• Due to the access mechanisms of the CAN bus, the real-time capability of the bus may

be influenced by the visualisation if visualisation and control system communicate

independently of each other with the field devices via CAN. Therefore, this

constellation is only with restrictions suitable for the use in Motion systems.

This restriction does not apply to the Lenze Logic & Motion control system!

• As an alternative, it is recommended to access the variables of the field devices via

Ethernet and control system IPC.

Access to the control system and the field devices connected

( 28)

Controller p300 ...

• are equipped with an integrated CAN communication interface (on board);

• only support the CAN master functionality

The optional MC-CAN2 communication card is not supported by controllers p300.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 62 63

Sem comentários

Lenze Controller-based Automation Manual do Utilizador Página 37