Lenze E84DGFCG Manual do Utilizador descarregar pdf (Página 14)

Lenze · Decentralised frequency inverter 8400 motec (EtherNet/IP™ option) · EDS84DMOTEIP EN 2.0 - 10/2013 14

Product description

Features and variants

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

3.2 Features and variants

The EtherNet/IP Communication Unit is available in the following versions:

• The EtherNet/IP Communication Unit is ...

• mounted on top of the Wiring Unit (E84DGVNxx);

• supplied internally via the Drive Unit (E84DGDVxxxxxxxx) or externally via a separate

voltage source.

• The I/O connections can be brought into the device via M12 connectors or cable glands.

• Devices without an integrated safety system (safety option) have no analog input and no relay

output.

• The integrated safety system can be used on machines for the protection of persons.

• The Inverter Drive 8400 motec is always an adapter device:

EtherNet/IP adapter with "Level 2" functionality

• 2-port interface with integrated switch functionality

• Access to all Lenze parameters (configurable via TCP/IP using the Lenze »Engineer«)

• Up to 3 TCP/IP socket connections for communication with the Lenze »Engineer«

• Support of "IP Config Pending" (activation of changed IP configuration by "power off/on" or

"type 0 reset")

• Support of the redundancy protocol DLR (Device Level Ring) as "beacon-based ring node"

• Up to 10 input data words to the scanner (20 bytes)

• Up to 8 output data words from the scanner (16 bytes)

• Further CIP features:

• Max. 8 CIP connections

• 1 "exclusive owner" connection

• I/O connection type: cyclic

•Minimum I/O cycle time: 4 ms

• Support of multicast messages, UCMM, ACD, BOOTP/DHCP, VLAN tagging/DSCP

Product series Type designation Product features

Enclosure

IP 65

EtherNet/IP

M12

I/O: Terminal

I/O: M12

Safety

Inverter Drives 8400 motec

EtherNet/IP Communication Unit

E84DGFCGANP 

E84DGFCG9NP  

E84DGFCGAJP  

E84DGFCG9JP  

 Hardware manual for Inverter Drives 8400 motec

Here you will find detailed information on the integrated safety system (safety option).

Software manual / »Engineer« online help for the Inverter Drive 8400 motec

Here you will find detailed information on how to configure the safety system (safety

option).

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 148 149

Comentários a estes Manuais

Sem comentários

Lenze E84DGFCG Manual do Utilizador Página 14

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Lenze E84DGFCG