Lenze 8400 motec Manual do Utilizador descarregar pdf (Página 346)

11 Parameter reference

11.2 Parameter list | C00076

346

Lenze · 8400 motec · Reference manual · DMS 4.1 EN · 08/2013 · TD05

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

C00076

C00079

C00081

C00084

Parameter | Name:

C00076 | Ti current controller

Data type: UNSIGNED_16

Index: 24499

= 5FB3

From version 03.00.00

Reset time Ti of the current controller for certain inverter functions (parameter identification, flying restart circuit)

• After the motor to be used has been selected from the motor catalogue, the suitable value can be entered

automatically.

Setting range (min. value | unit | max. value) Lenze setting

0.00 ms 500.00 10.61 ms

 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 100

Parameter | Name:

C00079 | SC: Settings

Data type: UNSIGNED_8

Index: 24496

= 5FB0

From version 04.00.00

Configuration of different options for sensorless control for synchronous motors (SLPSM

)

Selection list

0Off

1On

Subcodes Lenze setting Info

C00079/1 0: Off Reserved

C00079/2 0: Off Reserved

C00079/3 0: Off Reserved

C00079/4 1: On Field weakening for synchronous motors

 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1

Parameter | Name:

C00081 | Rated motor power

Data type: UNSIGNED_16

Index: 24494

= 5FAE

This value can be obtained from the motor nameplate. After the motor to be used has been selected from the motor

catalogue, the suitable value can be entered automatically.

Note:

It is mandatory to give the rated motor power for the sensorless vector control (SLVC

Setting range (min. value | unit | max. value) Lenze setting

0.00 kW 99.00 11.00 kW

 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 100

Parameter | Name:

C00084 | Motor stator resistance

Data type: UNSIGNED_32

Index: 24491

= 5FAB

After the motor to be used has been selected from the motor catalogue, the suitable value can be entered

automatically. An automatic detection via the motor parameter identification is possible as well.

Setting range (min. value | unit | max. value) Lenze setting

0 mohm 200000 330 mohm

 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1

1 2 ... 341 342 343 344 345 346 347 348 349 350 351 ... 517 518

Comentários a estes Manuais

Sem comentários

Lenze 8400 motec Manual do Utilizador Página 346

Comentários a estes Manuais

Manuais e produtos relacionados com Software Lenze 8400 motec