Lenze E82ZAFSC001 Manual do Utilizador descarregar pdf (Página 42)

7 Commissioning

Commissioning steps

EDK82ZAFSC DE/EN/FR 5.0



H2_Inbetriebnahmeschritte−INB_01_warn

Commissioning steps

Step Procedure Description

1. Switch on the mains

voltage.

The basic device will be ready for operation after approx.

1 second.

The controller inhibit is active.

Drive response:

The green LED is blinking.

Keypad:  (if attached)

2. Control digital inputs. Lenze setting:

l CW rotation:

– E1, E2, E3, E4: LOW

l CCW rotation:

– E1, E2, E3: LOW

– E4: HIGH

Individual setting:

l Adapt digital inputs under C0007 or C0410.

l The digital inputs must be controlled so that the drive

can start via terminal after controller enable.

3. Provide a setpoint Lenze setting:

Setpoint: 0 ... +10 V

Individual setting:

l Depending on the position of the DIP switch at the

function module

– apply master current to X3/8 or

– Apply master voltage at X3/8.

l Check C0034.

4. Release the controller via

the terminal.

Lenze setting:

X3/28 = HIGH (+12 ... +30 V)

Drive response:

l The green LED is on.

l Keypad:  goes off.

5. The drive should be running now.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 64 65

Sem comentários

Lenze E82ZAFSC001 Manual do Utilizador Página 42