Lenze EMF2133IB Manual do Utilizador descarregar pdf (Página 61)

Commissioning

Addressing

EDKMF2133 DE/EN/FR 6.1



H2 Adressierung−SetSlaveAdress

Addressing

Every device connected to the bus must get an unambiguous address.

 Note!

ƒ If S1 − S7 = OFF, the configurations set under code C0009 will become active

when the device is switched on.

ƒ If S1 ... S7 = ON, the configurations of all switch positions will become active

when the device is switched on.

The Lenze setting for the switches (S1 − S8) is OFF.

Switch off the voltage supply of the communication module and switch it on

again to activate the changed settings.

Valid address range: 3 … 126

(Lenze setting: 126, if C0009 = 1)

The address can be set arbitrarily

ƒ using the front switch (62)

ƒ the keypad or PC (63) or

ƒ through the master (class 2) (63)

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 103 104

Sem comentários

Lenze EMF2133IB Manual do Utilizador Página 61