Lenze EMZ2221IB Manual do Utilizador descarregar pdf (Página 39)

Troubleshooting and fault elimination 5

EDKMZ2221IB DE/EN/FR 6.0

H1fehler−stoerungen

RemedyCauseCard module

RemedyCause

TextDisplay

E 3

Check drive

No program in basic device. Load program into basic device.

Basic device is not ready for

operation.

Reset TRIP in basic device and − if

necessary − disconnect mains.

E 4

Repeat (T1 or T2)

AIF access protection is activated

in the basic device (C0096/1 ¹ 0)

Deactivate AIF access protection

in the basic device (C0096/1 = 0)

The data transmission has been

truncated or was faulty

Restart data transmission

E 5

Technology drive

needed

PLC program contains technology

functions which cannot be

transferred to the existing basic

device.

Servo PLC: use version "T".

ECS: use version ECSxA, ECSxS,

ECSxM, or ECSxP.

If required, contact Lenze service.

E 6

Drive not

supported

Basic device is unknown or not

supported.

Use card module with supported

basic devices only (^ 24).

E 7

Prog. is defective Stored data of the selected

program memory location are

faulty

Choose other program memory

location

E 8

Program

incompatible

The program is incompatible to

the basic device

Press key T3 and write compatible

program on the memory card.

E F

Format card (T3)

Memory card is not formatted Press button T3 to format the

memory card.

During formatting the letter F is

indicated on the 7−segment

display.

Memory card is defective Replace memory card

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 57 58

Comentários a estes Manuais

Sem comentários

Lenze EMZ2221IB Manual do Utilizador Página 39

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Lenze EMZ2221IB