Lenze E94AxHE Technology Application Synchronism Manual do Utilizador descarregar pdf (Página 76)

9400 Technology applications | Synchronism with mark synchronisation

Parameter setting & configuration

Parameterisable function blocks

76 L EDS94TA10040xxxx EN 1.1 - 10/2008

C3686 Deactivation mode

0 Positioning function deactivated:

• The position output dnPosOut_p

is set to 0.

• The status signal bInTarget is

reset to FALSE.

Lenze setting

1 Positioning function changes to the

stand-by state:

• The position output dnPosOut_p

is held on the current position

dnActPos_p.

• The status signal bInTarget is

reset to FALSE.

2 Positioning function changes to the

stand-by state:

•If bSetPosZero = FALSE:

The position output dnPosOut_p

is held on the set position

dnSetPos_p.

•If bSetPosZero = TRUE:

The position output dnPosOut_p

is held on zero.

• The status signal bInTarget is

reset to FALSE.

C03687/1 String of digits Position unit

•Read only

C03687/2 String of digits Speed unit

•Read only

C03688/1 0.0000 unit/t 214748.3647 Positive traversing speed

• Initialisation: 1000 unit/t

C03688/2 0.0000 unit/t 214748.3647 Negative traversing speed

• Initialisation: 1000 unit/t

C03689 -214748.3647 unit/t 214748.3647 Reference speed

• Read only (generated from the

machine parameters applied at

the input AxisData)

• Reference value for selecting

speeds.

C03691/1 0.010 s 130.000 Acceleration ramp

• Initialisation: 1.000 s

• Reference = reference speed

(display under C05054)

C03691/2 0.010 s 130.000 Deceleration ramp

• Initialisation: 1.000 s

• Reference = reference speed

(display under C05054)

C03691/3 0.010 s 130.000 Stop ramp

• Initialisation: 1.000 s

• Reference = reference speed

(display under C05054)

C03700 -2147483647 unit/t 2147483647 Speed at the output

•Display of the dnSpeedOut_s

output signal in the real unit of

the machine.

C03702 -214748.3647 unit 214748.3647 Position at the output

•Display of the dnPosOut_p output

signal in the real unit of the

machine.

Parameter Possible settings Information

1 2 ... 71 72 73 74 75 76 77 78 79 80

Comentários a estes Manuais

Sem comentários

Lenze E94AxHE Technology Application Synchronism Manual do Utilizador Página 76

Comentários a estes Manuais

Manuais e produtos relacionados com Software Lenze E94AxHE Technology Application Synchronism