Lenze EMF2102IB Manual do Utilizador descarregar pdf (Página 12)

Technical d ata

3-4

_^ONMObk

Processing time in the controller (t3)

The processing time in the controller depends on the controller type and the code numbers. This is

shown in the following table:

Code numbers Processing time (2102 + controller) [ms]

Series

820X 821X/8200 vector/822X 93XX

C0046, C0135 35

20 20

C0050, C0150 35 20 20

C0068 70 30 30

Write other code numbers 230 20

Read other code numbers 55 20 20

35 ms is valid for C0001 = 3. If C0001 = 1 and you write under C0046, access is also possible. However, t he processing time is prolonged

to 70 ms.

For immediately following write-access procedures, the response times may be up to 50ms.

The code number C0046 can only be read. Use a f ree code number (e. g. C0141) to select a setpoint. For this, re f er to the 93XX Manual.

This is a typical value. For some codes, the processing times may be longer. For this, refer to the 93XX Manual.

Show/Hide Bookmarks

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 61 62

Sem comentários

Lenze EMF2102IB Manual do Utilizador Página 12