Lenze Engineer v2.21 Manual do Utilizador descarregar pdf (Página 183)

Lenze · Engineer · 2.13 EN - 10/2014 183

Defining the system functionality

Creating an interconnection via the electrical shaft

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

8.14.1 Fixed synchronisation of the tools with regard to each other

By the absolute coupling of the drives via one master angle, the assignment of the (tool) positions

to each other is "hard" as in the case of a mechanical shaft:

[8-9] Principle of the mechanical shaft: fixed synchronisation of the tools with regard to each other

• A drive with a virtual master or a real master (encoder) can generate the master angle and

transfer it to the other drives, which then comply with this master angle.

• The master angle/machine cycle is usually shown "modulo" with a cycle of 0 to 360°. All

movements are exactly synchronised with this master angle.

• The tools can feature an optional measuring system ("limited", "unlimited", or "modulo"

traversing range).

• For the interconnected drives, the busbar structure is used almost exclusively.

 Main drive (master)

 Line shaft (here: one revolution = 360° = one production cycle)

 Slave drive 1: Feed control tape (non-linear indexing unit)

 Slave drive 2: stamp drive (mechanical cam)

 Cam discs for generating control-cam signals (2 cam tracks)

1 2 ... 178 179 180 181 182 183 184 185 186 187 188 ... 311 312

Sem comentários

Lenze Engineer v2.21 Manual do Utilizador Página 183