Lenze EMF2192IB Manual do Utilizador descarregar pdf (Página 8)

About this documentation

Terminology used



EDSMF2192IB EN 3.1

1.3 Terminology used

Term Meaning

EtherCAT® EtherCAT® is a real−time capable Ethernet system with top performance.

EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff

Automation GmbH, Germany.

Standard device

Lenze controllers with which the communication module can be used.

 12

Controller

»Global Drive Control« /

»GDC«

Lenze PC software which supports you in "engineering" (parameterisation, diagnostics

and configuration) throughout the whole life cycle, i.e. from planning to maintenance

of the commissioned machine.

»Engineer«

»PLC Designer«

»TwinCAT« EtherCAT configuration software by Beckhoff Automation GmbH, Germany

Code Parameter used for controller parameterisation or monitoring. The term is usually

called "index".

Subcode If a code contains several parameters, the individual parameters are stored under

"subcodes".

This manual uses a slash "/" as a separator between code and subcode (e.g. "C118/3").

The term is usually called "subindex".

Lenze setting

This setting is the default factory setting of the device.

Basic setting

HW Hardware

SW Software

ESI EtherCAT Slave Information (device description file in XML format)

CoE CANopen over EtherCAT

I−1600.20 CoE index (hexadecimal representation)

l In the example: Index 0x1600, subindex 0x20

DC "Distributed clocks" for EtherCAT synchronisation

PDO Process data object

SDO Service data object

"Hot connect" This feature enables the slave nodes to be coupled/decoupled during operation.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 63 64

Sem comentários

Lenze EMF2192IB Manual do Utilizador Página 8