Lenze ApplicationTemplate PackML (PLC Designer R3-x) Manual do Utilizador descarregar pdf (Página 36)

Opening the ApplicationTemplate PackML

Visualisation of the machine modules

Lenze · ApplicationTemplate PackML · 1.0 EN - 05/2014

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

7.6 Visualisation of the machine modules

• If, for instance, Machine Control has been

selected, the fields Al[01...04] of

L_EATP_Alarm_PackML serve to trigger

alarms.

• Possible reactions (Reac.) are: Abort, Stop,

Error, SystemFault, Warning, Information.

• The machine module transmits the

reaction type to the higher-level machine

module. The desired response to the alarm

can be programmed individually, except

for the commands Abort/Stop.

• If no error response has been programmed,

the state machine remains in the current

state.

•The Modules button calls the detailed view

for the machine modules.

• Click the desired machine module to show

the respective status and further details.

• All alarm messages are visible in the global

alarm list which can be called via the Alarm

List button. The global alarm list provides

an overview of all alarms occurred.

•The Alarm Quit button has to be pressed to

reset the error. The reason for the tripping

has to be removed. Then, the

corresponding alarm can be reset.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 98 99

Sem comentários

Lenze ApplicationTemplate PackML (PLC Designer R3-x) Manual do Utilizador Página 36