Lenze E84Dxxxxx Manual do Utilizador descarregar pdf (Página 25)

Lenze · 8400 protec · Drive-based safety · Software Manual · DMS 2.4 EN · 05/2013 · TD05 25

3 Safe configuration

3.3 Plausibility check

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

3.3 Plausibility check

Before transmitting the parameter set to the drive-based safety system, a plausibility check always

takes place.

With the Plausibility check... command in the Context menu (right mouse button) of the parameter

list you can start the plausibility check manually, to check the changes made in the parameter

settings with regard to plausibility.

• After the plausibility check a status message indicates whether the plausibility check was

successful.

• If the plausibility check failed, the status message contains the parameters with implausible

settings.

 Tip!

C15016

displays the parameter set version of the drive-based safety system.

3.4 General parameters

Short overview of "General" parameter group:

Module ID

Unique identification (1 ... 65534) for the safe device.

Safety address

The safety address serves as a unique identification of the drive-based safety system in systems

with several drives.

Setting of the safety address

( 26)

 Note!

Only a plausible parameter set can be transmitted to the drive-based safety system

using the "Send safe data" function!

Parameter Information Lenze setting

-Module ID 1

C15111

Safety address 0

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 69 70

Comentários a estes Manuais

Sem comentários