Lenze c300 Manual do Utilizador descarregar pdf (Página 40)

Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17 40

5 Commissioning the controller

5.5 I/O system 1000 at the backplane bus of a cabinet controller

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

 How to configure the I/O modules in the »PLC Designer«:

1. Append the I/O modules used as Devices to the I/O module coupler:

Note: The sequence of the I/O modules in the device tree must comply with the physical

arrangement.

2. View in the device tree/Device view:

• If everything is configured correctly, all modules are marked with the symbol in the

device tree after going online and starting the PLC.

• In the event of an error, i.e. if the configuration deviates from the physical arrangement,

the modules are marked with the symbol.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 194 195

Sem comentários

Lenze c300 Manual do Utilizador Página 40