Lenze PLC Designer PLC Designer (R2-x) Manual do Utilizador descarregar pdf (Página 149)

100

101

L-force | PLC Designer

The Individual Components

 DMS 3.2 EN 02/2011 TD29 147

6.3.15 'Project' 'Translate into another language'

This menu item is used for translating the current project file into another language.

This is carried out by reading in a translation file that was generated from the project

and externally enhanced in the desired national language with the help of a text

editor. The project can be just displayed or really get translated into one of the

generated language versions.

The following menu sub-items are present:

• Create translation file

• Translate project

• Show project translated

• Toggle translation

• See also: 'Editing of the translation file'

6.3.16 Create translation file

This command in the 'Project' 'Translate into another language' menu leads to the

'Create translation file' dialog.

Dialog for creating a translation file

In the Translation file field, enter a path that shows where the file is to be stored. The

default file extension is *.tlt; this is a text file. You also can use the extension *.txt,

which is recommended, if you want to work on the file in EXCEL or WORD, because in

this case the data are organized in table format.

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 843 844

Comentários a estes Manuais

Sem comentários

Lenze PLC Designer PLC Designer (R2-x) Manual do Utilizador Página 149

Comentários a estes Manuais

Manuais e produtos relacionados com Software Lenze PLC Designer PLC Designer (R2-x)