Lenze PLC Designer PLC Designer (R2-x) Manual do Utilizador descarregar pdf (Página 692)

100

101

L-force | PLC Designer

PLC Designer Visualization

690 DMS 3.2 EN 02/2011 TD29 

20.4.8 Grouping Elements

Elements can be grouped by selecting all desired elements and performing the

command 'Extras' 'Group'. The group will behave like a single element:

the grouped elements get a collective frame; when dragging the frame, depending on

the current configuration all elements will be stretched, compressed or keep their

original size; only the group can be moved to another position.

the grouped elements get collective properties: inputs only can effect the group and

not a single element. Thus the elements also get one collective configuration dialog

(category 'group'). The property 'Change color' can not be configured for a group !

To redefine a single element of a group, the grouping must be redone by the

command 'Extras' 'Ungroup'. The configuration of the group will be lost in this case.

 Note!

As soon as you save the project as PLC Designer Version 2.1 or lower, a group of

visualization elements will be resolved automatically; that means that the

elements of the group will be shown as single elements in the visualization.

20.4.9 'Extras' 'Send to Front'

Use this command to bring selected visualization elements to the front.

20.4.10 'Extras' 'Send to Back'

Use this command to send selected visualization elements to the back.

20.4.11 'Extras' 'Align'

Use this command to align selected visualization elements.

The following alignment options are available:

• Left: the left edge of each of the elements will be aligned to the element that is

furthest to the left

• the same is true for Right / Top / Bottom

• Horizontal Center: each of the elements will be aligned to the average horizontal

center of all elements

• Vertical Center: each of the elements will be aligned to the average vertical center

of all elements

1 2 ... 687 688 689 690 691 692 693 694 695 696 697 ... 843 844

Lenze PLC Designer PLC Designer (R2-x) Manual do Utilizador Página 692

Comentários a estes Manuais

Lenze PLC Designer PLC Designer (R2-x) Manual do Utilizador Página 692

Comentários a estes Manuais

Manuais e produtos relacionados com Software Lenze PLC Designer PLC Designer (R2-x)