Lenze PLC Designer PLC Designer (R2-x) Manual do Utilizador descarregar pdf (Página 87)

100

101

L-force | PLC Designer

We Write a Little Program

 DMS 3.2 EN 02/2011 TD29 85

The first transition switches through when START is TRUE and all others switch

through when DELAY in OK produces TRUE, i.e. when the set time period is finished.

The steps (from top to bottom) receive the names Switch1, Green2, Switch2, Green1,

whereby Init of course keeps its Name. "Switch" should include a yellow phase, at

Green1 TRAFFICSIGNAL1 will be green, at Green2 TRAFFICSIGNAL2 will be green.

Finally change the return address of Init after Switch1. If you have done everything

right, then the diagram should look like in the following image:

Program SEQUENCE, First Expansion Level, Instruction Part

Now we have to finish the programming of the individual steps. If you doubleclick on

the field of a step, then you get a dialog for opening a new action. In our case we will

use IL (Instruction List).

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 843 844

Comentários a estes Manuais

Sem comentários

Lenze PLC Designer PLC Designer (R2-x) Manual do Utilizador Página 87

Comentários a estes Manuais

Manuais e produtos relacionados com Software Lenze PLC Designer PLC Designer (R2-x)