Lenze PLC Designer PLC Designer (R2-x) Manual do Utilizador descarregar pdf (Página 594)

100

101

L-force | PLC Designer

Compiler Errors and Warnings

592 DMS 3.2 EN 02/2011 TD29 

3558

"Priority of task '<name>' is out of valid range between '<lower limit>' and '<upper

limit>'"

The currently defined priority for the task is not valid for the currently set target

system. Change target or modify the task configuration correspondingly.

3559

"Task '<name>': Interval-Tasks are not supported by the current target"

The current task configuration contains an interval task. This is not allowed by the

currently set target system. Change target or modify the task configuration

correspondingly.

3560

"Task '<name>': free wheeling tasks are not supported by the current target"

The current task configuration contains an free wheeling task. This is not allowed by

the currently set target system. Change target or modify the task configuration

correspondingly.

3561

"Task '<name>': event tasks are not supported by the current target"

The current task configuration contains event tasks which are not supported by the

currently set target system. Change target or modify the task configuration

correspondingly.

3562

"Task '<name>': external event tasks are not supported by the current target"

The current task configuration contains external event tasks which are not supported

by the currently set target system. Change target or modify the task configuration

correspondingly.

3563

"The interval of task '<name>' is out of valid range between '<lower limit>' and

'<upper limit>'"

Change the interval value in the configuration dialog for the task.

1 2 ... 589 590 591 592 593 594 595 596 597 598 599 ... 843 844

Comentários a estes Manuais

Sem comentários

Lenze PLC Designer PLC Designer (R2-x) Manual do Utilizador Página 594

Comentários a estes Manuais

Manuais e produtos relacionados com Software Lenze PLC Designer PLC Designer (R2-x)