Lenze EMF2113IB Manual do Utilizador descarregar pdf (Página 110)

Appendix

Code table

Feldbus-Baugruppe 2113 INTERBUS

7.8

7.8.1

7.8-1

EDSIBS-1.0-06/2003

7.8 Appendix

7.8.1 Code table

7.8.1.1 Codes of the 2113 INTERBUS fieldbus module

These codes determine the software used.

Software version and date can be read.

Code Values Lenze

setting

Explanation

L-C1810 33S2113I_x

y000

Software registra t ion number fo r 2113

L-C1811 Software creation date [ mmm tt jjjj hh:mm:ss]

Here you can enter the number of transferred process data words in bytes if all DIP

switches are “OFF”. The setting under this code is only active then.

The number of process data can have up to 20 bytes. L-C1910 can be overwritten

with values from 2 to 20. A value of 5 is internally rounded off to 4. The value is

saved in the EEPROM of the 2113 fieldbus module. The change of the

process-data length is only effective after the next basic initialisation of the 2113

fieldbus module, i.e. after switching the voltage supply off and on again.

A value higher than 4 bytes should only be used for 93XX and 8200 vector since

only here the data can be passed on. However, a length of > 4 bytes is possible

with 82XX. Values > 6 bytes should only be used for controllers of the 9300 Servo

PLC and Drive PLC series.

Code Values Lenze

setting

Explanation

L-C1910 2-20 4 INTERBUS process data length in bytes

Here you can set the unit or DRIVECOM control if all DIP switches are “OFF”.The

setting is only active then.

Code Values Lenze

setting

Explanation

L-C1911 0/1 1 • 1:

The control word is transmitted from the INTERBUS master to the

controller via the DRIVECOM status machine.

• 0:

The AIF-CTRL control word is active.

This code contains the number of parameter data words (PCP). The value is active

and can be changed if all DIP switches are “OFF”.

Code Values Lenze

setting

Explanation

L-C1912 0/1/2/4 1 Read/write number of parameter data words (PCP)

These codes contain all current switch positions. They can only be indicated!

Code Values Lenze

setting

Explanation

L-C1915 0-10 Display of current switch positions S1 ... S4, set process data word length

L-C1916 0/1 Display of the current switch position S7, device control or DRIVECOM

control

L-C1917 0/1/2/4 Display of the current switch position S5 and S6, set parameter data word

length

Software codes

Process data length

Unit or DRIVECOM control

Parameter data words

Indication of current switch

position

Show/Hide Bookmarks

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 118 119

Comentários a estes Manuais

Sem comentários

Lenze EMF2113IB Manual do Utilizador Página 110

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Lenze EMF2113IB