Lenze EMF2113IB Manual do Utilizador descarregar pdf (Página 111)

Appendix

Code table

Feldbus-Baugruppe 2113 INTERBUS

7.8

7.8.1

7.8-2

EDSIBS-1.0-06/2003

7.8.1.2 Controller codes

Code Values Lenze

setting

Explanation

L-C0001

Operating mode

Control source

Terminal

INTERBUS

Setpoint source

Terminal

8201BB

Terminal

INTERBUS

Parameter source

INTERBUS

INTERBUS (operating

module)

INTERBUS

L-C0009 Process data preconfiguration

) Please see the notes in chapter 7.8.2

L-C0142 This parameter L- C0142 prevents the drive from uncontrolled restarts

after:

• Mains switching

• Internal fault

• Internal message (with pulse inhibit) > 0.5 s

If the controller sets the status ”message” because of a failure (e.g. short

mains failure) and the fault remains active for longer than 0.5 s, controller

inhibit will be set automatically.

The parameter L- C0142 has the following function:

• L - C0142 = 1:

The drives will restart automatically as soon as the error has been

eliminated.

• L - C0142 = 0:

The controller remains inhibited and the drive cannot restart even if

the error has been eliminated.

– The drive restarts after a LOW-HIGH transition at one of the inputs

for ”controller inhibit” (CINH, e.g. at terminal X5/28) wieder an

All codes are described in detail in the corresponding Operating Instructions.

Show/Hide Bookmarks

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 117 118 119

Comentários a estes Manuais

Sem comentários

Lenze EMF2113IB Manual do Utilizador Página 111

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Lenze EMF2113IB