Lenze CANopen control technology Manual do Utilizador descarregar pdf (Página 93)

DMS 4.2 EN 07/2011 TD17 L 93

Control technology | CANopen communication manual

Diagnostics

Error messages if communication card MC-CAN2 is not available

13.3 Error messages if communication card MC-CAN2 is not available

If no communication card MC-CAN2 has been inserted into the industrial PC, error mes-

sages occur during the download of the »PLC Designer« project.

Remedy: Insert the communication card MC-CAN2 into the industrial PC.

13.4 Searching the CANopen bus for nodes using the Engineering PC



1. First directly connect your notebook via the USB system bus adapter EMF2177IB to

the CANopen bus.

2. Start the program »System bus configurator«:

• in the »Engineer« in the menu bar under "Online"

• or under "Start - Programs - Lenze - Communication"

3. Activate the USB system bus adapter (EMF2177IB).

4. Check the following under the "Settings" tab:

• baud rate = as on the devices

• parameter data channel = 0:

The entire address range is scanned. Devices responding on several SDO

channels are displayed with several node addresses.

Example:

5. Click the Communication diagnostics button on the Common tab to start the

search.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 104 105

Sem comentários

Lenze CANopen control technology Manual do Utilizador Página 93