Lenze ETC Motion Control Manual do Utilizador descarregar pdf (Página 26)

100

101

Getting started

Establishing the communication between PC and ETCHx

Setting the operating mode of the ETCHx

2.4

2.4.3

EDSTCXN EN 2.0

For the "With MMI" operating mode, the firmware file must be replaced by

the file "NetBoot.rsc" (Loader) on the ETCHx.

1. To delete the firmware, enter the following in the HyperTerminal: del

sd: etc*.rsc. Afterwards, press the <Enter> key.

2. To transfer the Loader to the ETC, activate the menu item Transfer

Send File in the HyperTerminal.

ETCM021

3. Specify the path to the file "NetBoot.rsc" and select the protocol

"Zmodem with Crach Recovery".

ETCM022

4. Click on Send.

While the file is being loaded into the control system, the following figure

is displayed. On the ETC front plate, the LEDs 1 ... 6 flash circulatingly.

ETCM023

Set the "With MMI" operating

mode

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 427 428

Comentários a estes Manuais

ama 11 Jan 2025 | 19:35:39

rasha

Lenze ETC Motion Control Manual do Utilizador Página 26

Comentários a estes Manuais

Manuais e produtos relacionados com Software Lenze ETC Motion Control