Lenze ETC Motion Control Manual do Utilizador descarregar pdf (Página 84)

100

101

Getting started

Updating the firmware of the ETCHx in the "Standalone" operating mode

Querying the version of the firmware

2.16

2.16.2

EDSTCXN EN 2.0

2.16.2 Querying the version of the firmware

1. When the prompt ">" of the boot monitor is displayed, enter the

command ver.

The version of the firmware is queried and displayed.

ETCN005

ETCN006

2.16.3 Updating the firmware

Initial state: The communication between PC and ETC has been established

and the monitor interface has been activated (¶ 21).

1. To transfer the current firmware to the ETC, activate the menu item

Transfer

W Send File in the HyperTerminal.

ETCM021

2. Specify the path to the firmware file and select the protocol "Zmodem

mit Wiederherstellung" ("Zmodem with Crash Recovery").

Variant "with ETC−MMI"

Variant "Standalone"

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 427 428

Comentários a estes Manuais

ama 11 Jan 2025 | 19:35:39

rasha

Lenze ETC Motion Control Manual do Utilizador Página 84

Comentários a estes Manuais

Manuais e produtos relacionados com Software Lenze ETC Motion Control