Lenze ETC Motion Control Manual do Utilizador descarregar pdf (Página 44)

100

101

Getting started

Parameterising drives via machine constants

Testing the drives in inching mode

2.8

2.8.7

EDSTCXN EN 2.0

2.8.7 Testing the drives in inching mode

After the machine constants have been adapted, the drives must be tested

in inching mode. Check whether the configured drives behave according to

the specifications.

1. In the ETC MMI window, press <F9> (setup).

The MMI window opens in the "Setup" operating mode.

2. Press <F2> (Manual travel).

3. In the submenu, press <F1> (Modal travel).

An individual drive is selected. The selected drive is indicated by the

setpoint with a green background.

ETCN011

4. In the submenu, alternately press <S3> (Travel +) and <S4>(Travel −).

In inching mode, the selected drive rotates in positive or negative

direction.

5. To change the speed of the drive, press <S6> (Override +) or <S7>

(Override −).

6. To select the next axis for traversing, press <S5> (axis).

The green setpoint display switches.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 427 428

Comentários a estes Manuais

ama 11 Jan 2025 | 19:35:39

rasha

Lenze ETC Motion Control Manual do Utilizador Página 44

Comentários a estes Manuais

Manuais e produtos relacionados com Software Lenze ETC Motion Control