Lenze ETC Motion Control Manual do Utilizador descarregar pdf (Página 55)

100

101

Getting started

ETC PLC programming with CoDeSys

Configuring the control system in the ETC−CoDeSys

2.11

2.11.2

EDSTCXN EN 2.0

) Note!

New modules are added at the end of the list. To insert a new

module before an existing one, select the existing module and

add it via the right mouse button with Element einfügen (Insert

Element).

A module can be removed from the list via the right mouse

button and Delete.

Each module that is configured in the control system requires an EDS file. The

EDS file belonging to the module must be located in the target directory of

the selected control system (in this case Lenze).

An EDS file contains entries of keywords that describe the property of the

module with the respective values.

In the case of modules from third−party manufacturers, the corresponding

EDS files must be copied into the target directory of the control system.

Description of the module in

the EDS file

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 427 428

Comentários a estes Manuais

ama 11 Jan 2025 | 19:35:39

rasha

Lenze ETC Motion Control Manual do Utilizador Página 55

Comentários a estes Manuais

Manuais e produtos relacionados com Software Lenze ETC Motion Control