Lenze ETC Motion Control Manual do Utilizador descarregar pdf (Página 339)

100

101

PLC programming

Connecting ETC and PC

DPR interface (only ETCPx, PCI insert card)

8.3

8.3.3

339

EDSTCXN EN 2.0

8.3.3 DPR interface (only ETCPx, PCI insert card)

For the communication via the DPR interface the Windows WDM driver for

the ETCPx and the Lenze MMI Gateway must be installed.

In the communication parameters of CoDeSys the driver "E*DPR" must be

selected. The following values must be entered into the driver settings:

ETC101

When selecting the driver "DPR" the controls stated in the MMI Gateway can

be selected from the table entry "Value".

This is done by double clicking on the corresponding field (here: ETC1)

followed by switching via the arrow keys.

1 2 ... 334 335 336 337 338 339 340 341 342 343 344 ... 427 428

Comentários a estes Manuais

ama 11 Jan 2025 | 19:35:39

rasha

Lenze ETC Motion Control Manual do Utilizador Página 339

Comentários a estes Manuais

Manuais e produtos relacionados com Software Lenze ETC Motion Control