Lenze ETC Motion Control Manual do Utilizador descarregar pdf (Página 78)

100

101

Getting started

Operation via a Lenze−HMI

Settings for the connection of a Lenze−HMI H505

2.15

2.15.1

EDSTCXN EN 2.0

To inform the control system that communication to an HMI is desired,

change the system setting as follows:

ETCN043

In the system settings, activate the object directory and the network

variables on the "Network functions" tab.

The object directory provides the declared variables with the corresponding

indexes to the HMI (Lenze code = index with CANopen).

The desired number of indexes can be set in the index area. The CAN network

acts as network interface to the HMI.

After these settings have been made, the CoDeSys provides the object

directory:

ETCN044

Settings in the PLC program

(target system)

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 427 428

Comentários a estes Manuais

ama 11 Jan 2025 | 19:35:39

rasha

Lenze ETC Motion Control Manual do Utilizador Página 78

Comentários a estes Manuais

Manuais e produtos relacionados com Software Lenze ETC Motion Control