Lenze ETC Motion Control Manual do Utilizador descarregar pdf (Página 86)

100

101

Getting started

Updating the firmware of the ETCHx in the "Standalone" operating mode

Updating the firmware

2.16

2.16.3

EDSTCXN EN 2.0

Command Meaning

ver Shows the versions of the boot loader and the currently loaded firmware.

sz [file name] Sends the currently loaded firmware under the specified name to the PC via

Z modem.

rz When "Dateien senden" ("Transmit files") is selected, this command is sent

implicitly by the connected terminal program to the control system. It is

used for the transmission of firmware or boot loader to the control system.

For the transmission, the "ZMODEM" protocol must be selected.

quit Quits the boot monitor and starts the loaded firmware.

reset Resets the control system.

help Shows the commands of the boot monitor.

Important commands of the

boot monitor

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 427 428

Comentários a estes Manuais

ama 11 Jan 2025 | 19:35:39

rasha

Lenze ETC Motion Control Manual do Utilizador Página 86

Comentários a estes Manuais

Manuais e produtos relacionados com Software Lenze ETC Motion Control