Lenze EVS9332xS Manual do Utilizador descarregar pdf (Página 228)

Function library

Function blocks

3.2.63 Multi−axis synchronisation (SYNC1)

3−176

EDSVS9332S−EXT EN 2.0

Function

l Possible axis synchronisations (chapter 3.2.63.1)

l Cycle times (chapter 3.2.63.2)

l Phase displacement (chapter 3.2.63.3)

l Synchronisation window for synchronisation via terminal (SYNC WINDOW) (chapter 3.2.63.4)

l Correction value of phase controller (SYNC CORRECT) (chapter 3.2.63.5)

l Fault indications (chapter 3.2.63.6)

l Configuration examples (chapter 3.2.63.7)

l Scaling (chapter 3.2.63.8)

3.2.63.1 Possible axis synchronisations

Operating mode

Code Value Function

C1120

0 FB without function.

Assigns the data at the inputs directly to the outputs.

1 CAN Sync active

Synchronises the controllers to the sync telegram of the system bus.

2 Terminal Sync active

Synchronises the controllers to the sync signal of terminal X5/E5.

Synchronisation time

In addition to certain mains connection and initialisation time of the controller, the FB SYNC1 also

requires a synchronisation time.

The synchronisation time depends on

l the baud rate of the system bus (CAN−SYNC),

l the starting time (reception of the first SYNC telegram / signal),

l the time between the SYNC telegrams,

l the SYNC correction factor (C0363),

l the operating mode of the FB SYNC1.

1 2 ... 223 224 225 226 227 228 229 230 231 232 233 ... 263 264

Sem comentários

Lenze EVS9332xS Manual do Utilizador Página 228