Lenze DSD Manual do Utilizador descarregar pdf (Página 331)

100

101

Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23 331

11 Drive Dimensioning

11.3 Mechanical brake selection

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

11.3.6 Selection table

The selection table presents the parameters of the brakes which can be selected.

• A distinction between preview values and further parameters is to be made.

• A basic description of the selection table and tools for a quick selection of suitable components

can be found here:

Structure of the selection tables

( 34)

Sorting and filtering results in selection tables

( 35)

Description of the parameters

Parameter Unit Description

Metric Imperial

% % Safety factor of the brake

• The safety factor is calculated from the ratio of the

rated braking torque and the braking torque required.

• The result is limited to 10 and is displayed even if

the value calculated is higher.

• The DSD only checks the dimensioning as holding

brake!

Possible messages:

Rated torque/dimensioning torque < safety factor of

the brake ( 461)

brk

) s s Theoretically calculated braking time

• For the calculation of the actual braking time this val-

ue must not be used.

Type Type designation of brake

Relevant topics:

Spring-applied brake (BFK)

( 327)

Permanent magnet holding brake (PMB)

( 327)

Size Size of the brake

Nm lbfft Rated braking torque of the brake

1 2 ... 326 327 328 329 330 331 332 333 334 335 336 ... 495 496

Comentários a estes Manuais

Sem comentários

Lenze DSD Manual do Utilizador Página 331

Comentários a estes Manuais

Manuais e produtos relacionados com Software Lenze DSD