Lenze DSD Manual do Utilizador descarregar pdf (Página 357)

100

101

Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23 357

11 Drive Dimensioning

11.7 Motor components

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

11.7 Motor components

11.7.1 Feedback selection

When the selection is made, DSD checks whether

• the design of the feedback system is compatible with the selected motor,

• the function of the feedback system is compatible with the selected inverter,

• the inverter may be operated without feedback.

 Tip!

You can also configure feedback systems for motors which act on slave drives. They there-

fore do not have to be compatible to the inverter that controls the motor.

The following criteria must be checked manually:

• Accuracies, resolutions, limit frequencies, max. permissible speeds etc.

• The limit frequency at the inverter input can be exceeded if the feedback system outputs a

too high pulse frequency due to the combination of number of increments and max. speed.

1 2 ... 352 353 354 355 356 357 358 359 360 361 362 ... 495 496

Comentários a estes Manuais

Sem comentários

Lenze DSD Manual do Utilizador Página 357

Comentários a estes Manuais

Manuais e produtos relacionados com Software Lenze DSD