Lenze DSD Manual do Utilizador descarregar pdf (Página 349)

100

101

Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23 349

11 Drive Dimensioning

11.6 Inverters

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

11.6.1.3 Overcurrent operation for Servo Drives 9400

The inverters are designed for two overcurrent modes:

•Cycle of 5 s

• Load period of 0.5 s with peak current 

• Recovery time of 4.5 s with limited current 

•Cycle of 3 min

• Load period of 1 min with peak current 

• Recovery time of 2 min with limited current 

After a load period with a peak current a recovery time has to follow. During the recovery time the

current may not exceed the value specified.

The values specified refer to the rated output current I

N,out

[11-20] Overcurrent capability for Servo Drives 9400 at 45 °C

 Cycle of 5 s

 Peak current for 0.5 s

 Max. current during the recovery time for 4.5 s

 Cycle of 180 s

 Peak current for 60 s

 Max. current during the recovery time for 120 s

100

0.5 s

4.5 s

60 s 120 s





1 2 ... 344 345 346 347 348 349 350 351 352 353 354 ... 495 496

Comentários a estes Manuais

Sem comentários

Lenze DSD Manual do Utilizador Página 349

Comentários a estes Manuais

Manuais e produtos relacionados com Software Lenze DSD