Lenze E84DGFCC Manual do Utilizador descarregar pdf (Página 47)

EDS84DMOTCAN EN 3.0 - 11/2011 L 47

Communication manual 8400 motec CANopen

Process data transfer

Port interconnection of the process data objects (PDO)

8.2 Port interconnection of the process data objects (PDO)

The preconfigured port interconnection of the process data objects is activated by setting

code C00007 = 40: Network (MCI/CAN).

 How to freely configure the port interconnection in the »Engineer«:

1. Under the Process data object tab, click the Go to application button.

2. The Ports tab displays the port blocks CAN1_IN/CAN2_IN and CAN1_OUT/

CAN2_OUT.

 Note!

The »Engineer« screenshots shown on the following pages are only examples for

the setting sequence and the resulting screens.

Depending on the software version of the controller and of the »Engineer«

software installed, the screenshots may deviate from your »Engineer«

representation.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 110 111

Sem comentários

Lenze E84DGFCC Manual do Utilizador Página 47